/ / / Alabaia booth with own hands: sizes, drawings, photo

Alabaya booth with their own hands: sizes, drawings, photos

A booth is needed for all dogs that live inA country house, even if they are large and fluffy. Alabai booth is not just a place where a dog can find protection from cold or rain, this is her personal space necessary for a healthy and happy life.

Therefore, it is necessary to approach the construction of a booth very responsibly, because this is a house for your watchman.

Important requirements for the future booth for alabai

How to make a booth for alabaya with your own handsFirst you need to choose a place for the booth, it does notShould be located in an open sunny place, as the dog will be hot in summer in direct sunlight. But in a too dark place to put a box is not recommended. It is better to arrange a dog house in the shade of trees on a small hill.

You can not put a booth in the lowlands, where water is collected after rain or melting snow, then it will always be damp and begin to deteriorate.

Dimensions of the booth

It is important to correctly calculate the size of the booth. Imagine how unpleasant you will be when you spend a lot of time and energy, and your Alabai will be uncomfortable in his house, and he will reject it. If you make a box for a small puppy, then you will have to follow approximate calculations.

You can not predict what kind of growth your dog will be. Therefore, make a booth in the recommended size for large dogs:

  • Length 130 cm,
  • Width 100 cm,
  • Height 90 cm.

Here the inner dimensions of the booth are indicated, and notExternal. Doing more scale construction is not recommended, since one of the main functions of the booth is the heating of the animal from its own body. Consequently, a large booth to warm the Alabai will be more difficult, and a frosty winter it will be cold.

Building a booth for Alabai own hands

If you build a box for an adult dog, then youYou can use the following formula as a basis. The inner height of the booth: the height of the dog + 6 cm. The width of the booth: the length of the dog, measured from the tip of the nose to the tail + 5-10 cm. The height of the entrance to the box should be equal to the height of the dog or to be a couple of centimeters shorter.

How to make a booth for alabaya with your own handsThe width of the entrance is 10 cm wider than the chest of the dog. The entrance to the booth is located on the long part of the building, slightly out of the center. The booth should be so that the dog can observe from the entrance, which simultaneously serves as a window, behind everything that takes place in the courtyard.

Materials for a booth

The best material for a booth that is not foundA worthy replacement, is a tree. Boards or logs for the booth are treated with special impregnation from rotting, from insects, from fire. Painting boards or coating them with enamel can only be done outside in a ready-made box, from the inside it is not necessary. The floor booths are made of floorboards.

It is convenient to make the roof easy to remove. It is constructed of blocks and plywood, insulated with mineral wool or polystyrene. Above, the roof is covered with roofing felt and tiles or other roofing materials. The bakery can be sewed with a lining, but it is possible to leave a wooden surface covered with paint or enamel. In winter, the entrance to the booth is blocked by a curtain of dense fabric that keeps the heat inside.

Now the market offers many models of booths,Which differ practicality and creative design. You can make this booth yourself. Particularly economical will be the option when the booth is made of building materials that have remained after the construction of a house or villa. Algorithm for the construction of a booth:

</ P>
  1. We make the design drawing.
  2. Cut into sizes bars.
  3. We collect from the bars using self-tapping walls booth: front, rear and two side.
  4. The internal part of the walls is covered with plywood and all the walls are fastened together with self-tapping screws.
  5. We collect the frame from the bars for the floor and on top of the treasure floorboards, between which there should be no gaps.
  6. We collect the frame for the ceiling, we ply it from the inside with plywood, we insulate it with mineral wool.
  7. Wall panels and floor insulated with foam.
  8. Outside we cover the booth with paint, enamel or lining the lining.
  9. The ceiling frame is attached to the rear wall on the door hinges.

In this case, a flap ceiling is obtained. This is one of the simplest in the execution and budget options for building a booth for alabai.

a source
Pay attention to: